IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 474 / 605

Table 25. DFSMS Messages Based on Library Failure or Exception Conditions (continued)
Resulting Console Message Action
CBR3760E Library library-name vision system not
operational.
Key components of the vision system of library
library-name have failed. The 3494 Tape Library cannot
read the external labels on cartridges. Processing of audit
or eject requests cannot be performed. Also, volumes
cannot be added to the 3494 Tape Library because their
external labels cannot be read. Other requests continue to
be accepted and performed.
This message is retained on the console until the vision
system is operational again.
1. Call your service representative to repair the 3494
Tape Library vision system.
2. Resubmit audit or eject requests when the vision
system is operational.
CBR3761E Library library-name Library Manager
offline.
Library library-name started the process of going offline
as the result of an operator at the Library Manager
requesting the library to move to the Offline state. All
requests that the Library Manager has accepted already
are completed normally. No other requests are accepted.
1. Determine why the Library Manager was placed in
the Offline state.
2. If a repair action is required, call your service
representative.
CBR3762E Library library-name intervention required.
One or more conditions in library library-name requires
operator intervention to resolve. Function requests
continue to be accepted and executed, if possible. If
CBR3757E Library library-name in Pause mode
operational state accompanies this message, the
intervention condition caused automated operations to
be stopped.
This message is retained on the console until all
intervention-required conditions have been cleared.
1.
Go to the 3494 Tape Library and follow the
instructions for the intervention-required condition
specified on the Library Manager operator console.
See “Intervention-Required Conditions and Actions”
on page 458 for the intervention-required conditions.
2. After all conditions are resolved, return the 3494 Tape
Library to Auto mode, if required.
CBR3763E Library library-name Library Manager
CHECK-1 condition.
The Library Manager detected a severe failure condition
in library library-name . All requests that the Library
Manager accepted are lost.
1.
Go to the library and determine if the Library
Manager is trying to recover. If it is, the Library
Manager console is displaying an initialization
message. If it is not, it is displaying an execution or
fatal error message.
2. If the Library Manager recovers, resubmit all
outstanding library requests or jobs.
3. If it does not recover, call your service representative.
CBR3764E Library library-name all storage cells full.
All storage cells in library library-name are occupied by,
or reserved for, cartridges that are already in the 3494
Tape Library. No more cartridges can be added to the
3494 Tape Library. Cartridges in the input station of the
3494 Tape Library cannot be added.
This message is retained on the console until the 3494
Tape Library has available storage cells.
Cartridges must be ejected before any can be added to
the library. There is also an intervention-required
condition set for this condition. It is cleared
automatically when the 3494 Tape Library is no longer
full.
448
3494 Tape Library Operator Guide