IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 521 / 605

Table 28. Intervention-Required Conditions (continued)
Intervention-Required Condition Resolution Actions
Message OP0145
Unable to make stacked volume xxxxxx read-only.
Contact your System Administrator.
Message OP0146
Unable to make stacked volume xxxxxx read-write.
Contact your System Administrator.
Message OP0147
Stacked volume xxxxxx is in an invalid state.
Contact your System Administrator.
Message OP0148
There are stacked volumes in the VTS database that
can’t be found in the library.
Contact your System Administrator.
Message OP0151
The time on the VTS is incorrect.
Probable Cause
The time on the VTS could not be adjusted automatically
and will require a manual adjustment by the Service
Representative.
Contact your Service Representative.
Message OP0152
VTS has ejected a volume successfully, but it has active
data.
Probable Cause
The ejected stacked volume may contain logical volumes
in the
″
private
″
category.
1. Determine if the ejected stacked volume contains
logical volumes in the
″
private
″
category.
2. If so, then contact your Service Representative to
report that a damaged stacked volume containing one
or more logical volumes was ejected.
Message OP0153
Stacked volume xxxxxx is misplaced.
Probable Cause
The VTS wanted to mount the specified stacked volume,
but it was not in the Library Manager’s database.
Locate the misplaced volume and reinsert it into the
library.
Chapter 8. Problem Determination Procedures
495