IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 524 / 605

Table 28. Intervention-Required Conditions (continued)
Intervention-Required Condition Resolution Actions
Message OP0304
VTS ADSM port xx has failed. Call service.
Probable Cause
v
The Library Manager has lost communications with
the VTS on its ADSM port.
v
The VTS may be down or there is a problem with the
Library-to-VTS network.
Contact your Service Representative.
Message OP0306
Pool nn has stacked volumes of different media class
and was reset to default values. (VTS z)
Probable Cause
The VTS has detected the following condition: The
storage pool has stacked volumes of a different media
class. For example, the pool might be defined as a 3590
media class but has 3592 stacked volumes. In this case,
the VTS changes the pool properties to match the media
class of the resident stacked volumes.
1.
Contact your System Administrator.
2.
At the Library Manager console, select the
Commands menu.
3. Select System Management.
4. In the Stacked Volume Pool Properties window, view
or change the pool properties as desired.
Message OP0307
VTS attempted High Capacity Cache Option with xxxxx
volumes but yyyyy volumes already exist. (VTS z)
Probable Cause
The number of logical volumes the Library Manager has
already assigned to the VTS (yyyyy) exceeds the
maximum number set on the High Capacity Cache
Option (xxxxx). The Library Manager will not allow any
more logical volumes to be inserted into the VTS.
Call your service representative.
Message OP0308
VTS indicates it is a TS7740 but VTS is not
taught/configured as a TS7740.
Probable Cause
The TS7740 has been taught/configured as a
B16/B18/B10/B20 at the Library Manager. It should be
taught as a TS7740.
Contact your Service Representative.
498
3494 Tape Library Operator Guide