IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 324 / 605

– Barcode
– ILEP - Selective Encryption
– ILEP - Select All
v
Advanced
CAUTION:
Before using the Advanced settings method a Service
Representative should be consulted. This method allows the
sending of ALL possible combinations of encryption settings and
may cause a drive or CU to fail if invalid settings are sent to the
selected drives.
When the Advanced option is selected, you will also need to provide
the following:
SCSI Density Code
Choices are:
– Shows encryption
– Masks encryption
– No change
– Drive Default
Key Path
Choices are:
– Drive Default
– System
– Application (IBM)
– Application (T10)
– Application (any)
3. With the drives still selected, choose Set VPD .
The following steps occur automatically after selecting Set VPD :
a. Get VPD for each selected drive in order to have the most current data.
This also ensures that the drives are still initialized.
b. Set VPD for each selected drive with the new encryption settings.
c. A final Get VPD to get the current data back from the drives. This also
ensures that the encryption values were properly set.
While the action is taking place, the current status (either
Get VPD
or
Set
VPD ) for each drive is displayed in the drives list box.
VPD Summary/Code Load/Dev Reset (System Administrator
Only)
Note: You can view vital product data and perform a code load from the Specialist
under the title
″
Manage 3592 VPD
″
(see “Specialist Features and Functions”
on page 396).
The VPD Summary/Code Load window allows you to view a summary of vital
product data and load code for one or more 3592 devices. You can execute the
following functions:
v Get VPD Summary
v
Copy Code from CD to Hard Drive
v Start Code Load
v
Start Code Activate / Dev Reset
298
3494 Tape Library Operator Guide
|
|
|
|