IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 310 / 605

2. Select the Backup to diskette radio button.
3.
Select From VTS 1 or From VTS 2 .
4. Select the Start Transfer button.
To backup the current Library Manager administrative data to a hard drive:
v
Select the Backup to hard drive radio button.
v Select From VTS 1 or From VTS 2 .
v
Select the hard drive.
v Select the Start Transfer button.
Restoring data
The restore operation is more selective. The restore can load the saved VTS/VE
data into VTS/VE-1, VTS/VE-2, or both. If you are using the Backup to Hard
Drive option and you need to save (back up) the data for both VTSs (VEs),
perform the following steps:
1. Execute a backup for VTS/VE-1
2. Move that data (the *.XFR files) somewhere else
3. Then execute the backup for VTS/VE-2
If you do not perform these steps, the VTS/VE-2 backup data can overlay the
VTS/VE-1 data. Figure 180 shows the Transfer LM Administrative Data Window
when data is being restored from a diskette.
Note: If the Specialist User IDs and Passwords are selected for the restore, then the
library manager Web Server recycles (disabled/enabled). This will cause a
momentary disruption for all Web users.
Figure 180. Transfer LM Administrative Data Window — Restore from Diskette
284
3494 Tape Library Operator Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|