IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 518 / 605

Table 28. Intervention-Required Conditions (continued)
Intervention-Required Condition Resolution Actions
Message OP0140
Volser xxxxxx could not be moved from Storage Pool yy
to Storage Pool zz. View help panel for error code = vv.
(VTS w)
Probable Cause
The VTS was unable to move the stacked volume
because of one of the reasons listed below by error code:
v
1 - The physical volume is in use by another process
v
2 - The physical volume is in a pending eject state
v
3 - The physical volume is read-only
v
4 - The physical volume is in a destroyed state
v
5 - Unable to delete physical volume from storage pool
v
6 - Unable to define physical volume to storage pool
v
7 - Reclamation failed on physical volume
v
8 - Unable to update physical volume access to
read-only
v
9 - Query for physical volume in ADSM failed
v
10 - Physical volume has export checkout volume error
v
11 - Physical volume has import checkout volume
error
v 12 - Physical volume has checkout other volume error
v 13 - Physical volume has ADSM no stripping error
v 14 - Physical volume has checkin volume error
v 15 - Physical volume has ADSM not libvol error
v 16 - Physical volume has ADSM not vol error
v 17 - Physical volume has pool mismatch error
v 18 - Physical volume has LM unavailable error
v
19 - Physical volume has eject volume table error
v
20 - Physical volume has destroyed-not-empty error
v
21 - Physical volume has delete volume error
v
22 - Physical volume has define volume error
v
23 - Physical volume has active data and cannot be
ejected
v 24 - Physical volume has insert error
v 25 - Physical volume cannot be moved into its current
pool
v
26 - Physical volume’s media type is incompatible
with the target pool’s media class
Resolution actions listed by error code (contact your
system administrator in all cases):
v 1 - Try the move at a later time
v 2 - Try the move after the eject occurs
v 3 - Try the move after Read-Only-Recovery corrects the
condition
v 4 - Try the move after the eject occurs
v 5 - Try the move after Error Recovery corrects the
condition
v
6 - Try the move after Error Recovery corrects the
condition
v 7 - Try the move after Read-Only-Recovery corrects the
condition
v
8 - Call your service representative
v
9 - Try the move after Error Recovery corrects the
condition
v 10 - Call your service representative
v 11 - Try the move after Error Recovery corrects the
condition
v 12 - Try the move after Error Recovery corrects the
condition
v
13 - Try the move after Error Recovery corrects the
condition
v 14 - Try the move after Error Recovery corrects the
condition
v
15 - Try the move after Error Recovery corrects the
condition
v 16 - Try the move after Error Recovery corrects the
condition
v
17 - Try the move after Error Recovery corrects the
condition
v
18 - Try the move after Error Recovery corrects the
condition
v 19 - Try the move after Error Recovery corrects the
condition
v
20 - Try the move after Error Recovery corrects the
condition
v 21 - Try the move after Error Recovery corrects the
condition
v
22 - Try the move after Error Recovery corrects the
condition
v 23 - Try the move after Read-Only-Recovery corrects
the condition
v 24 - Try the move after Error Recovery corrects the
condition
v
25 - Contact your system administrator
v
26 - Contact your system administrator
492
3494 Tape Library Operator Guide