IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 561 / 605

Table 51. Status Codes and Status Text (continued)
Operation Status Resolution Actions
Status Code
34
Status Text
Fast Ready Scratch Category Logical Volume
Exported
Probable Cause
The logical volume that was exported was in a
category with the Fast Ready attribute set ON.
This is likely to be an error in the Export List.
1. Determine the validity of the Export List record for
this logical volume.
2. If this was an erroneous Export operation, it is
necessary to import the logical volume from the
Exported Stacked Volume.
Status Code
35
Status Text
Physical volume incompatible with tape drive
Probable Cause
The Physical Volser specified for the import of a
logical volume or all logical volumes was
written on a tape drive with an incompatible
format to the drive attached to the importing
VTS.
1.
Eject the Exported Stacked Volume from the Import
category.
2. Import these volumes into a VTS that has 3590
Model E1A tape drives in the associated Model D1x.
Status Code
36
Status Text
Logical Volume in Disaster Recovery
Probable Cause
Disaster recovery or cache repair action on the
VTS.
1.
Mount the logical volume as a specific mount from
the host to force a recall.
2. Rerun the Export operation.
Status Code
37
Status Text
Unable to Mount Output Volume
Probable Cause
The VTS is unable to mount scratch tape either
because the Library Manager is offline or
because the scratch tape is faulty.
1. Verify that the Library Manager is online and in Auto
mode.
2. Eject the faulty tape.
3.
Rerun the Export operation.
Status Code
38
Status Text
A Required Construct Does Not Exist in Library
Probable Cause
One or more of the construct names does not
exist. The construct actions parameter specifies
failure if constructs are not previously defined.
1. Define constructs at the Library Manager and restart.
2. Modify the construct actions parameter to use
″
CREATENAME
″
and restart.
Appendix B. VTS Export and Import Advanced Function
535