IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 508 / 605

Table 28. Intervention-Required Conditions (continued)
Intervention-Required Condition Resolution Actions
Message OP0102
A stacked volume has a label error. Internal: xxxxxx,
External: yyyyyy
Probable Cause
During validation that the correct stacked volume was
mounted, the volume serial number read from the media
did not match what was expected. The volume is ejected
to the convenience I/O station.
This is likely caused by human intervention in the
library that involved moving physical cartridges between
storage cells and, when the 3494 was returned to Auto
mode, Inventory Update was disabled. Without
performing Inventory Update, the 3494 Tape Library has
no way of updating its database to know where
cartridges have been moved.
1. Remove the cartridge from the convenience I/O
station.
2. If human intervention in the library is the cause,
perform an Inventory Update operation.
3. If human intervention is not the cause, check the
external label of the cartridge for damage and relabel
if necessary.
4.
Place the cartridge in the convenience I/O station.
Message OP0103
A permanent, nonrecoverable Tape Volume Cache error
has occurred. (VTS z)
Probable Cause
During the initialization of the VTS z, unrecoverable
errors were detected with the tape volume cache. The
VTS is unusable. Service is required.
Call your service representative.
Message OP0104
An orphaned logical volume (xxxxxx) has been found.
Call service.
Probable Cause
During a check of the VTS database, a reference to
logical volume xxxxxx was found, but there is no record
of its physical location. This could be the result of a
hardware or internal software problem. Any data
associated with the logical volume is lost.
1. Notify your system administrator.
2. If this intervention occurs multiple times, call your
service representative.
482
3494 Tape Library Operator Guide