IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 399 / 605

Table 18. Operator Intervention Messages and Parameters (OPINT TRAP Type) (continued)
OPINT # Parameter [A] Parameter [B] Parameter [C]
Actual Library Manager OPINT Trap
Message
413 LMA or LMB Errcode — [A] : Possible hard drive failure detected.
View help panel for error code =
[B]
.
414 Accessor Errcode — Error threshold exceeded for accessor
[A]
.
View help panel for error code = [B] .
415 Volser — — During an insert/inventory the media type
of volser [A] did not match its destination
pool. Volser not assigned to a VTS.
416 Frame # — — Preferred EASH in frame
[A]
is not
responding. Call service.
417 Frame # — — Non-preferred EASH in frame [A] is not
responding. Call service.
418 Port # Frame # — Port
[A]
on the preferred EASH in frame
[B] has failed. Call service.
419 Port # Frame # — Port [A] on the non-preferred EASH in
frame
[B]
has failed. Call service.
430 Port # Frame # — The Primary Link has encountered multiple
failures. Call service.
437 Volser Device — Cartridge
[A]
has been left in an uninstalled
device [B] . Call service.
438 Volser Device — Device xxx is reporting an element addr of
zero. Call service.
439 Volser Device — Library Manager has lost communications
with the primary EKM.
440 Volser Device — Library Manager has lost communications
with the alternate EKM.
600 Frame # — — CU in frame/subsystem has lost
communication with its primary/secondary
encryption key manager.
UNSOL Library Manager SNMP Traps
This section discusses the format of the Library Manager UNSOL messages. Unlike
the Library Manager OPINT SNMP traps, the UNSOL SNMP trap messages are all
different and require special programming to handle them.
There are seven supported Library Manager UNSOL SNMP trap messages:
1.
X10 - Category State Change
2. X11 - Library Manager Operator Message
3. X12 - Library I/O Station State Change
4. X13 - Operational State Change
5. X14 - Volume Exception
6. X15 - Device Availability Changed
7. X16 - Device Category Change Notification
Note: X represents the hexadecimal value.
Category State Change SNMP Traps:
Chapter 6. Advanced Operating Procedures
373