IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 215 / 605

Information displayed in the list boxes includes:
Port/Dev
The LAN port and device number assigned to the EASH device, both in
hexadecimal format.
Frame The number of the frame where the EASH device is installed.
IP Address
The IP address assigned to the EASH device.
Port/Sock
The port number on the EASH device and the socket number of this port.
Speed
The transmission rate of the connection between the EASH port and the
tape drive.
DPC-Stat
The status of the Dual Path Concentrator. Possible values are either OK or
Fail .
EASH-Stat
The status of the EASH device. Possible values are OK , Fail (error code) ,
or UNK (error code) .
DEV-Stat
The status of the attached tape drive. Possible values are OK , Fail (error
code) , or UNK (error code) .
Error codes displayed for Fail statuses for the EASH devices and tape drives are:
1 Primary link failure on device connected via non-preferred EASH
2 Alternate link failure on device connected via preferred EASH
3 Unknown but could possibly be serial cables not wired correctly between
EASH and device
4 Device connected via non-preferred EASH is not installed
5 Device connected via preferred EASH is not installed
6 Device connected via non-preferred EASH is not configured
7
Device connected via preferred EASH is not configured
8
Non-preferred EASH is not functioning
9 Preferred EASH is not functioning
10 Device connected via non-preferred EASH or communication path between
non-preferred EASH and device has failed
11 Device connected via preferred EASH or communication path between
preferred EASH and device has failed
12 Serial cables are not wired correctly between EASH and device
13 Device is marked unavailable
The EASH Status window has the following push buttons:
Refresh
Updates the information in the EASH Status window (all frames will be
displayed).
Exit Closes the EASH Status window.
Chapter 6. Advanced Operating Procedures
189