IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 523 / 605

Table 28. Intervention-Required Conditions (continued)
Intervention-Required Condition Resolution Actions
Message OP0161
Below threshold for uncopied data in cache (VTS z)
Probable Cause
The amount on data in the VTS’s cache that has not been
copied to physical tape was above the threshold for the
installed cache capacity. Message OP0161 had been
generated. The amount of data not copied has now fallen
below the threshold.
The VTS determines that it is below the threshold for the
installed cache capacity when the amount of data to copy
is less than the threshold for 30 consecutive sample
periods (amount of data to copy is sampled every 30
seconds).
Note: This message must be enabled by the IBM service
representative.
1. This condition can be encountered during a period of
heavy write workload to the VTS.
Message OP0300
One or more logical volumes have corrupted tokens.
Call service.
Probable Cause
Code error or token database corruption. During token
processing in a PtP VTS, the tokens for at least one
volume contained values that are incompatible, such that
the data validity of the volume is compromised.
Call your service representative.
Message OP0301
Previous Peer-to-Peer Logical Volume Restore did not
complete. Call service.
Probable Cause
An attempt to restore logical volumes due to a
Peer-to-Peer restore operation failed during Library
Manager initialization.
Call your service representative.
Message OP0303
Volser xxxxxx is in the manual eject category.
Probable Cause
At least one physical volume is in the manual eject
category indicating it was in the library at one time.
Now it is not in the library even though an eject for the
volser has not been issued.
v If the volser was intentionally removed from the
library, clear the intervention.
v
If the volser should not have been manually ejected,
locate the cartridge and reinsert it into the library.
Chapter 8. Problem Determination Procedures
497