IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 277 / 605

Volser ranges
Opens the Volser Ranges window (see Figure 142 on page 238).
Refresh
Refreshes the Manage Unassigned Volumes window.
Help Provides help about the Manage Unassigned Volumes window.
Note: Only 50 physical volumes are displayed. If more than 50 Unassigned
volumes exist, then –More– is displayed at the bottom of the list box.
Manage Import Volumes
Note:
This does not apply to the TS7700 Virtualization Engine.
The Manage Import Volumes window (Figure 151) allows you to move physical
volumes ( J - , JA -, JB - , JJ -, and K -type) in the Import category to the Insert
category. You can also eject the volumes from the 3494 Tape Library.
Note: Media type JB is not supported with VTS.
The Manage Import Volumes window has the following push buttons:
Select all
Selects all volumes within the current list box.
De-select all
Deselects all volumes within the current list box.
Import
Moves the selected volumes to the Import category list box.
Insert Moves the selected volumes to the Insert category list box.
Eject Moves the selected volumes to the Eject category list box.
Figure 151. Manage Import Volumes Window
Chapter 6. Advanced Operating Procedures
251