IBM 8285 Nways, Installation And User Manual

Page: 191 / 265

The status of a UNI port is
OKAY PVC-ONLY
.
Steps to Take:
1. Make sure that the ATM address of the attached device supports the ATM address registration of the UNI port.
Important: When a port's status is OKAY PVC-ONLY , only PVC connections are supported.
2. If the UNI port is attched to another switch, you may prefer to define the port as an SSI or NNI port, to be able to
establish SVCs. (For SSI ports, the bandwidth allocation must be the same at both ends of the trunk. See the
IBM 8285/8260: ATM Command Reference Guide.)
The status of an SSI port is
ACN mismatch
.
Steps to Take:
1. Make sure that the workgroup switch belongs to the same ATM cluster as the attached device. Enter the SHOW
DEVICE command to check the configured ATM address.
The status of an SSI port is Misconfigured .
Steps to Take:
1. Make sure that the device is attached to an SSI port.
Chapter 21. Troubleshooting
163