IBM 8285 Nways, Installation And User Manual

Page: 95 / 265

2
Make sure that both ejectors (left and right) are in the open position before attempting to
install the module as shown in Figure 34.
Figure 34. ATM Media Module Ejectors ("Open" and "Closed" Positions)
3
Match the module circuit board to the slot's left and right card guides. The easiest way to do
this is to line up the module circuit board with the number at the left of the selected slot
before you insert the circuit board in the card guides.
Chapter 7. Mounting ATM Media Modules in the Expansion Unit
67