IBM 8285 Nways, Installation And User Manual

Page: 115 / 265

User Passwords
1. Log on to workgroup switch using the administrator password.
2. At the management prompt, type the SET DEVICE PASSWORD USER command:
à
@
ð
8285
>
set device password user
Then press Enter.
3. In the next three fields displayed, enter the administrator password and the new user password (up
to fifteen characters) twice as shown here:
à
@
ð
Enter current administrator password: {admin password}
New password:
{new user password}
Re-enter password: {new user password}
Then press Enter. You are prompted when the password is accepted:
à
@
ð
Password changed.
4. To save your new user password, type the SAVE DEVICE or the SAVE ALL command:
à
@
ð
8285
>
save device
Then press Enter.
Checking Passwords: Passwords cannot be viewed after they have been set.
Chapter 10. Configuring Basic Workgroup Switch Parameters
87