IBM 8285 Nways, Installation And User Manual

Page: 102 / 265

Using the Configuration Console
The following section describes keystrokes and the command syntax to use to enter ATM Workgroup
Switch commands from a configuration console. For a complete description of all ATM Workgroup
Switch configuration commands, see the
IBM 8285/8260: ATM Command Reference Guide, SA33-0385.
Entering ATM Workgroup Switch Commands
You configure the various functions of the workgroup switch by entering commands at the prompt on the
configuration console. The default prompt appears as shown here:
à
@
ð
8285
>
ATM Workgroup Switch commands are not case-sensitive. The system interprets
ABC
(uppercase) the
same as
abc
(lowercase).
The values you enter for certain command parameters are, however, case-sensitive and must be typed
exactly as shown in the
IBM 8285/8260: ATM Command Reference Guide, SA33-0385. For example, if
you enter
RWTRAP
and
rwtrap
for the
com_name
parameter in two separate SET COMMUNITY commands,
you will create two different community names.
Keyboard Functions
When entering ATM Workgroup Switch commands the following keyboard functions are available:
Keystroke Function
BS or Backspace Moves the cursor one space backward and deletes the character.
Enter Runs the command or prompts you to enter missing parameters.
Space bar Types the complete ATM Workgroup Switch command.
Ctrl + C Cancels the command that is currently running and returns you to a blank
command line.
Ctrl + R Retypes the last command you entered on the command line. The last 10
commands you entered can be retyped in this way.
Ctrl + L Types the currently edited command on the next line.
? Displays a list of available commands.
74
IBM 8285 Nways ATM Workgroup Switch: Installation and User’s Guide