IBM 8285 Nways, Installation And User Manual

Page: 137 / 265

Checking the LESs: Use the SHOW LAN_EMUL SERVERS command to display the current status and
parameters defined for both LESs:
à
@
ð
8285
>
show lan_emul servers
-------------------------------------------------------------------------------
---------------------------- LAN Emulation Server
1 --------------------------
Status : Running.
LAN type : Ethernet.
Actual LAN name : "LAN1eth".
Desired LAN name : "LAN1eth".
Actual max frame size : 1516.
Desired max frame size: 1516.
Max number of clients : 124.
ATM address : 39.99.99.99.99.99.99.ðð.ðð.99.99.ð1.5ð.5ð.5ð.5ð.5ð.5ð.5ð.ð2
Current number of operational LECs: 3
-------------------------------------------------------------------------------
---------------------------- LAN Emulation Server
2 --------------------------
Status : Running.
LAN type : Token Ring.
Actual LAN name : "LAN2tr".
Desired LAN name : "LAN2tr".
Actual max frame size : 4544.
Desired max frame size: 4544.
Max number of clients : 4.
ATM address : 39.99.99.99.99.99.99.ðð.ðð.99.99.ð1.5ð.5ð.5ð.5ð.5ð.5ð.5ð.ð3
Current number of operational LECs: ð
Stopping a LES
To stop a LES (for example, emulated LAN number 2):
à
@
ð
8285
>
set lan_emul server 2 stop
Stopping a LES also stops its associated BUS.
Depending on the number of LECs that are connected to the LES, there may be a delay from the time
the command is issued and the time the LES is completely stopped. For this reason, you should verify
that the LES has stopped using the SHOW LAN_EMUL SERVERS command before trying to start the
LES again.
Chapter 14. Configuring LAN Emulation Parameters
109