IBM 8285 Nways, Installation And User Manual

Page: 209 / 265

Using Workgroup Switch Trap Messages
A trap message is sent to the ATM Workgroup Switch local console when a configuration change is
made or when an error occurs in the ATM subsystem. For example, if an Expansion Unit module is
removed from an ATM Workgroup Switch, a message describing this change is sent to the console. A
sample message is shown here:
à
@
ð
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Change trap on module 1
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
The first field in the trap message is described in Table 5. The other fields of information that can
appear are self-explanatory and depend on the type of trap received.
Table 5. Trap Messages
Field Contents
Enterprise Specific Trap One of the following messages appears:
Ÿ Configuration Change in System
Ÿ Configuration Change in Module x
Ÿ Configuration Change in Port x.y
Ÿ Hello
Ÿ Authenticity Failure from Manager X
Chapter 21. Troubleshooting
181