Minimum Local Configuration
Before you can log on to an ATM Workgroup Switch from a remote switch, you must perform a minimum
configuration using a configuration console (in either Normal or SLIP mode). The minimum configuration
that is required depends on the type of subnetwork you will use for the TELNET session:
Classical IP
Set the ATM address of the workgroup switch
Enable the port that connects to the ARP server
Set the ATM address of the ARP server in the workgroup switch
Set the IP address of the workgroup switch
Enable the port that will be used for the TELNET session.
LAN Emulation
Set the ATM address of the workgroup switch
If you will use an internal LES, start the LES
If you will use an external LES, enable the port that will be used to connect to the
external LES
Start the LEC.
These steps are described in “Procedure 2: Configuring the ATM Workgroup Switch” on page 24.
Logon
You specify the ATM Workgroup Switch by entering its IP address with the TELNET command:
à
@
ð
C:\
>
telnet 123.94.2ð2.9
[ENTER]
Once you are connected to the remote switch, you must log on by entering the correct password.
Afterwards all the commands you enter are run on the remote module as if entered from a local console
session.
Chapter 9. Setting-Up and Using the Configuration Console
83
Summary of Contents for 8285 Nways
