IBM 8285 Nways, Installation And User Manual

Page: 96 / 265

Figure 35. Inserting an ATM Media Module in the Expansion Unit
4
Slide the circuit board into the slot's left and right card guides. Push the module in at a point
to the right of the "half height" level for smoother travel. See Figure 34 on page 67.
5
Push the end of each ejector toward the horizontal center of the ATM media module to pull
the module into the slot. When the module makes contact with the backplane connectors,
seat the module into the connectors by pressing each ejector simultaneously into the closed
position.
6
Fasten the spring-loaded screws on the front panel of the module to the workgroup switch
using your fingers. Do not overtighten.
7
Return to “Procedure 1: Mounting the ATM Workgroup Switch Components” on page 22.
68
IBM 8285 Nways ATM Workgroup Switch: Installation and User’s Guide