IBM 8285 Nways, Installation And User Manual

Page: 24 / 265

Chapter 8, Power-On and Self Test describes the power-on procedure and the automatic
Power-On Self Test (POST) routine.
Part 3, Configuration Procedures
Chapter 9, Setting-Up and Using the Configuration Console describes how to setup and
use the a console with the ATM Workgroup Switch.
Chapter 10, Configuring Basic Workgroup Switch Parameters describes how to
configure the ATM Workgroup Switch local switch parameters.
Chapter 11, Configuring Ports and Media Modules describes how to configure ports on
the Base Unit and on ATM media modules in the Expansion Unit.
Chapter 12, Configuring Trunk Connections describes how to configure trunk connections
between ATM switches and set up PVCs.
Chapter 13, Configuring TCP/IP Parameters describes how to configure the workgroup
switch to provide Classical IP Over ATM functions.
Chapter 14, Configuring LAN Emulation Parameters describes how to configure the
workgroup switch to provide LAN Emulation Over ATM functions.
Chapter 15, Configuring SNMP Parameters describes how to configure the workgroup
switch for management by an SNMP management application.
Chapter 16, Working With Configuration Settings describes how to save and work with
configuration settings.
Part 4, Device Attachment Procedures
Chapter 17, Attaching 25.6Mbps Devices to the ATM Workgroup Switch describes how
to attach 25.6Mbps devices to ports on the Base Unit or on ATM media modules in the
Expansion Unit.
Chapter 18, Attaching 155Mbps Devices to the I/O card describes how to attach
155Mbps devices to the 155Mbps ATM I/O Card on the Base Unit.
Part 5, Management, Code Updates and Troubleshooting
Chapter 19, Network and Switch Management provides guidelines for managing the ATM
Workgroup Switch.
Chapter 20, Updating Microcode and Picocode provides guidelines for upgrading
microcode and picocode, and for performing upload and download operations.
Chapter 21, Troubleshooting describes how to diagnose and solve problems associated
with the operation of the ATM Workgroup Switch.
Part 6, Appendixes
Appendix A, Specifications describes the specifications for the ATM Workgroup Switch.
Appendix B, Cables, Pins and Connectors provides cabling and connector guidelines for
connecting a console and ATM devices to the ATM Workgroup Switch Base Unit.
Appendix C, Error and Information Codes list the return codes displayed for the Q.2931
and TFTP protocols.
Appendix D, ATM Address Formats in the ATM Workgroup Switch shows complete
definitions of all ATM address formats supported by the ATM Workgroup Switch.
xxii
IBM 8285 Nways ATM Workgroup Switch: Installation and User’s Guide