Husqvarna MS 630 2011 I.E., Manual

Page: 86 / 304

+
-
TE
SMS
SMS
2
A
B
TE
TE
EN - 28
ADJUSTMENT OF THE CONTROL LEVER AND FRONT BRAKE
FLUID LEVEL CHECK
On the SMS model the lever position can be adjusted (4 set-
tings available) to suit the rider hand size. To decrease the lever
distance from the handgrip, turn the adjuster (B) CLOCKWISE. To
increase the lever distance from the handgrip, turn the adjuster
(B) COUNTER CLOCKWISE. On the TE models the adjuster (2),
located on the control lever, allows adjusting of the free play
(a). Free play (a) must be at least 0.1 in.
The level of the fluid in master cylinder reservoir must
never be below the minimum value (1), which can be
checked from the window on the rear side of the master
cylinder body (TE). For (SMS) model, check the level on
the clear reservoir.
A decrease of the fluid level will let air into the system,
hence an extension of the lever stroke.
WARNING*: If the brake lever feels
mushy when pulled, there may be air in
the brake lines or the brake may be de -
fective. Since it is dangerous to operate
the motorcycle under such conditions,
have the brake system immediately
checked by the Husqvarna Dealer.
CAUTION*: Do not spill brake fluid onto
any painted surface or light lens.
CAUTION*: Do not mix two brands of flu -
id. Completely change the brake fluid in
the brake system if you wish to switch
to another fluid brand.
CAUTION*: Brake fluid may cause irrita -
tion. Avoid contact with skin or eyes. In
case of contact, flush thoroughly with
water and call a doctor if your eyes
were exposed.
A: to increase clearance
B: to decrease clearance