manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 7

3.2 Environmental Specifications............................................................................................................................................ 27
3.3 Physical Specifications.........................................................................................................................................................28

4 Software and Hardware Compatibility............................................................................ 29
5 Safety Instructions................................................................................................................ 30

5.1 Safety Instructions................................................................................................................................................................ 30
5.2 Maintenance and Warranty.............................................................................................................................................. 33

6 ESD............................................................................................................................................ 34

6.1 ESD Prevention...................................................................................................................................................................... 34
6.2 Grounding Methods for ESD Prevention.......................................................................................................................35

7 Internal Cabling.....................................................................................................................36

7.1 TPM Cabling........................................................................................................................................................................... 36
7.2 Screw-in RAID Controller Card Cabling......................................................................................................................... 37
7.3 Cabling of the SATA Controller Integrated in the Southbridge............................................................................ 38
7.4 PCIe Card Cabling................................................................................................................................................................. 39

8 Parts Replacement................................................................................................................ 40

8.1 Spare Parts Description.......................................................................................................................................................40
8.2 Obtaining Tools..................................................................................................................................................................... 41
8.3 Basic Operations....................................................................................................................................................................42
8.3.1 Power-On Procedure........................................................................................................................................................ 42
8.3.2 Power-Off Procedure........................................................................................................................................................43
8.3.3 Removing an XH321 V5.................................................................................................................................................. 44
8.3.4 Installing an XH321 V5....................................................................................................................................................47
8.4 Field Replaceable Units.......................................................................................................................................................50
8.4.1 Removing an M.2 SSD..................................................................................................................................................... 51
8.4.2 Installing an M.2 SSD....................................................................................................................................................... 52
8.4.3 Removing the Screw-in RAID Controller Card......................................................................................................... 54
8.4.4 Installing the Screw-in RAID Controller Card.......................................................................................................... 56
8.4.5 Removing the Supercapacitor (Server with a Screw-in RAID Controller Card)........................................... 58
8.4.6 Installing the Supercapacitor.........................................................................................................................................59
8.4.7 Removing the Avago SAS3004iMR PCIe RAID Controller Card......................................................................... 61
8.4.8 Installing the Avago SAS3004iMR PCIe RAID Control Card................................................................................61
8.4.9 Removing an M.2 FRU on the Avago SAS3004iMR PCIe RAID Controller Card.......................................... 62
8.4.10 Installing an M.2 FRU on the Avago SAS3004iMR PCIe RAID Controller Card......................................... 64
8.4.11 Removing a Processor................................................................................................................................................... 66
8.4.12 Installing a Processor..................................................................................................................................................... 69
8.4.13 Removing a Memory Module..................................................................................................................................... 75
8.4.14 Installing a Memory Module.......................................................................................................................................76
8.4.15 Removing the TPM......................................................................................................................................................... 79
8.4.16 Installing the TPM...........................................................................................................................................................81
8.4.17 Removing the Battery....................................................................................................................................................84

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

Contents

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

vi

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands