manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 83

3. Horizontally holding the processor and heat sink, align the notched corner on

the heat sink with the notched corner on the processor socket, and place the

processor and heat sink downwards on the socket along the guide sleeves.

NO TICE

Keep the processor and heat sink parallel with the mainboard to prevent

damage to processor socket pins.

4. Use a Phillips screwdriver to tighten the two diagonal screws (marked 1 on

the label) on the heat sink. See (1) in 

Figure 8-40

.

5. Use a Phillips screwdriver to tighten the four screws (marked 2 in the label) in

the middle of the heat sink in a diagonal sequence. See (2) in 

Figure 8-40

.

Figure 8-40 Installing the heat sink

Step 11 Install the air duct.

For details, see 

8.4.24 Installing the Air Duct

.

Step 12 Install the server node.

For details, see 

8.3.4 Installing an XH321 V5

.

Step 13 Power on the server node.

For details, see 

8.3.1 Power-On Procedure

.

----End

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

74

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands