manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 177

B

 Glossary

B.1 A-E

B

baseboard

management

controller (BMC)

The BMC complies with the Intelligent Platform

Management Interface (IPMI). It collects, processes,

and stores sensor signals, and monitors the operating

status of components. The BMC provides the hardware

status and alarm information about the managed

objects to the upper-level management system, so that

the management system can manage the objects.

 

E

ejector lever

A part on the panel of a device used to facilitate

installation or removal of the device.

Ethernet

A baseband local area network (LAN) architecture

developed by Xerox Corporation by partnering with

Intel and DEC. Ethernet uses the Carrier Sense Multiple

Access/Collision Detection (CSMA/CD) access method

and allows data transfer over various cables at 10

Mbit/s. The Ethernet specification is the basis for the

IEEE 802.3 standard.

 

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

B Glossary

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

168

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands