manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 9

11.1 Technical Support.............................................................................................................................................................149
11.2 Product Information........................................................................................................................................................ 150
11.3 Product Configuration Resources............................................................................................................................... 151
11.4 Maintenance Tools...........................................................................................................................................................151

12 Software and Configuration Utilities...........................................................................153

12.1 iBMC..................................................................................................................................................................................... 153
12.2 BIOS...................................................................................................................................................................................... 154

A Appendix............................................................................................................................... 156

A.1 Product SN............................................................................................................................................................................156
A.2 Operating Temperature Limitations............................................................................................................................ 157
A.2.1 Operating Temperature Limitations (Supercapacitor for the RAID Controller Card Configured)...... 157
A.2.2 Operating Temperature Limitations (Optical Modules Configured)............................................................ 159
A.2.3 Operating Temperature Limitations (Avago SAS3004iMR RAID Controller Card + M.2 FRU

Configured).................................................................................................................................................................................. 161
A.2.4 Operating Temperature Limitations (Different Models of Processors)........................................................163
A.3 RAS Features........................................................................................................................................................................ 165

B Glossary................................................................................................................................. 168

B.1 A-E........................................................................................................................................................................................... 168
B.2 F-J.............................................................................................................................................................................................169
B.3 K-O.......................................................................................................................................................................................... 169
B.4 P-T............................................................................................................................................................................................ 169
B.5 U-Z...........................................................................................................................................................................................170

C Acronyms and Abbreviations........................................................................................... 171

C.1 A-E........................................................................................................................................................................................... 171
C.2 F-J............................................................................................................................................................................................ 172
C.3 K-O.......................................................................................................................................................................................... 174
C.4 P-T............................................................................................................................................................................................ 174
C.5 U-Z.......................................................................................................................................................................................... 176

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

Contents

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

viii

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands