manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 55

Figure 8-5 Removing an optical module using die-casting pliers

Step 5 Remove the server node.

NO TICE

● When removing a device, wear protective gloves to avoid burns.
● To prevent device damage or personal injury, hold the bottom of the device

with both hands when removing it.

1. Press the ejector release button on the server node. See (1) in 

Figure 8-6

.

2. Fully open the ejector lever. See (2) in 

Figure 8-6

.

3. Holding the ejector lever, pull the server node out of the chassis horizontally.

See (3) in 

Figure 8-6

.

4. Close the ejector lever.

Figure 8-6 Removing the server node

Step 6 Place the removed server node in an ESD bag.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

46

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands