manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 70

Step 9 Install the air duct for the supercapacitor.

Step 10 Install the server node.

For details, see 

8.3.4 Installing an XH321 V5

.

Step 11 Power on the server node.

For details, see 

8.3.1 Power-On Procedure

.

----End

8.4.7 Removing the Avago SAS3004iMR PCIe RAID Controller

Card

Procedure

Step 1 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

Step 2 Remove the server node.

For details, see 

8.3.3 Removing an XH321 V5

.

Step 3 Place the server node on the ESD workstation.

Step 4 Determine the position of the Avago SAS3004iMR RAID controller card.

Step 5 Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.

For details, see 

8.4.9 Removing an M.2 FRU on the Avago SAS3004iMR PCIe

RAID Controller Card

.

Step 6 Remove the Avago SAS3004iMR RAID controller card.

For details, see 

8.4.19 Removing a PCIe Card

.

Step 7 Place the removed component in an ESD bag.

NO TICE

Place only one component in an ESD bag.

----End

8.4.8 Installing the Avago SAS3004iMR PCIe RAID Control

Card

Procedure

Step 1 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

61

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands