manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 64

Step 3 Place the server node on the ESD workstation.
Step 4 Determine the position of the screw-in RAID controller card.

Figure 8-16 Position of the screw-in RAID controller card

Step 5 Check whether a supercapacitor is configured.

●

If yes, go to 

Step 6

.

●

If no, go to 

Step 7

.

Step 6 Remove the supercapacitor.

For details, see 

8.4.5 Removing the Supercapacitor (Server with a Screw-in

RAID Controller Card)

.

Step 7 Remove the cable from the RAID controller card.

For details, see 

7 Internal Cabling

.

Step 8 Remove the RAID controller card.

1. Loosen the screws that secure the RAID controller card. See (1) in 

Figure

8-17

.

2. Remove the RAID controller card from the connector on the mainboard. See

(2) in 

Figure 8-17

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

55

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands