manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 105

Step 2 Remove the server node.

For details, see 

8.3.3 Removing an XH321 V5

.

Step 3 Place the server node on the ESD workstation.

Step 4 Determine the position of the air duct.

Step 5 Lift the air duct.

Figure 8-62 Removing the air duct

Step 6 Place the removed component in an ESD bag.

NO TICE

Place only one component in an ESD bag.

----End

8.4.24 Installing the Air Duct

Procedure

Step 1 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

Step 2 Remove the server node.

For details, see 

8.3.3 Removing an XH321 V5

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

96

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands