Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 90

Page: 90 / 186

Figure 8-47 Removing a TPM

Step 8 Remove M.2 SSDs.

For details, see

8.4.1 Removing an M.2 SSD

Step 9 Place the removed component in an ESD bag.

NO TICE

Place only one component in an ESD bag.

----End

8.4.16 Installing the TPM

Procedure

Step 1 Power off the server node.

For details, see

8.3.2 Power-Off Procedure

Step 2 Remove the server node.

For details, see

8.3.3 Removing an XH321 V5

Step 3 Place the server node on the ESD workstation.

Step 4 Remove the air duct.

For details, see

8.4.23 Removing the Air Duct

Step 5 Determine the position of the TPM.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands