manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 79

Step 2 Remove the server node.

For details, see 

8.3.3 Removing an XH321 V5

.

Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.

For details, see 

8.4.23 Removing the Air Duct

.

Step 5 Take the component out of its ESD bag.
Step 6 Determine the position of the processor.

Figure 8-34 Positions of processors

Step 7 Install the processor on the carrier.

1. Take a processor carrier out of an ESD bag.
2. Aligning the notch in one edge of the processor with the protrusion on the

processor carrier, secure it.
Ensure that the processor corner with a triangle mark is in the corner of the

processor carrier with a notched triangle.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

70

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands