Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 85

Page: 85 / 186

Figure 8-42 Removing a memory module

Step 7 Place the removed memory module in a memory box.

Step 8 Install memory modules.

NO TE

Perform this operation only when a memory module is not installed immediately.

----End

8.4.14 Installing a Memory Module

NO TICE

If the processor power is 200 W or 205 W, a wide conjoined heat sink is required,

which occupy memory channels DIMM001 and DIMM031.

Procedure

Step 1 Power off the server node.

For details, see

8.3.2 Power-Off Procedure

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands