Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 16

Page: 16 / 186

Indicator and Button Description

Table 2-1 Indicators and buttons on the front panel

Silkscreen

Indicator/

Button

Description

Power

button/

indicator

Power indicator:
● Off: The device is not powered on.
● Steady green: The device is powered on.
● Blinking yellow: The iBMC is starting. The

power button is locked and cannot be

pressed. The iBMC is started in about 1

minute, and then the power indicator is

steady yellow.

● Steady yellow: The device is standby.
Power button:
● When the device is powered on, you can

press this button to gracefully shut down

the OS.

NOTE

For different OSs, you may need to shut down

the OS as prompted.

● When the device is powered on, holding

down this button for 6 seconds will forcibly

power off the device.

● When the power indicator is steady yellow,

you can press this button to power on the

device.

Health status

indicator

● Off: The device is powered off or is faulty.
● Blinking red at 1 Hz: A major alarm has

been generated on the system.

● Blinking red at 5 Hz: A critical alarm has

been generated on the system.

● Steady green: The device is operating

properly.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

2 Hardware Description

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands