manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 60

8.4.1 Removing an M.2 SSD

Procedure

Step 1 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

Step 2 Remove the server node.

For details, see 

8.3.3 Removing an XH321 V5

.

Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.

For details, see 

8.4.23 Removing the Air Duct

.

Step 5 Determine the position of the M.2 SSD.

Figure 8-12 Positions of M.2 SSDs

Step 6 Remove the TPM.

For details, see 

8.4.15 Removing the TPM

.

Step 7 Remove the M.2 SSD.

1. Use an M2.5 Phillips screwdriver to loosen the screw that secures the M.2

SSD. See (1) in 

Figure 8-13

.

2. Tilt the M.2 SSD 20° to 30° upwards, and pull it out. See (2) in 

Figure 8-13

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

51

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands