Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 74

Page: 74 / 186

Figure 8-27 Installing an M.2 FRU

Step 4 Check the status of the M.2 FRU indicator on the Avago SAS3004iMR RAID

controller card.

Figure 8-28 M.2 FRU indicators

Table 8-2 Indicator status

Indicator

Description

M.2 FRU fault

indicator

● Off: The M.2 FRU is running properly.
● Blinking yellow: The M.2 FRU is being located, or

RAID is being rebuilt.

● Steady yellow: The M.2 FRU is faulty or not

detected.

M.2 FRU activity

indicator

● Off: The M.2 FRU is not in position or is faulty.
● Blinking green: Data is being read, written, or

synchronized.

● Steady green: The M.2 FRU is inactive.

Step 5 Restore the drive data.

NO TE

Perform this operation only after you replace a drive.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands