Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 110

Page: 110 / 186

Step 6 Install memory modules.

For details, see

8.4.14 Installing a Memory Module

Step 7 Install M.2 SSDs.

For details, see

8.4.2 Installing an M.2 SSD

Step 8 Install the TPM.

For details, see

8.4.16 Installing the TPM

Step 9 Install the PCIe card.

For details, see

8.4.20 Installing a PCIe Card

Step 10 Install the PCIe riser module.

For details, see

8.4.22 Installing a PCIe Riser Module

Step 11 Install the screw-in RAID controller card.

For details, see

8.4.4 Installing the Screw-in RAID Controller Card

Step 12 Install the supercapacitor if it is configured.

For details, see

8.4.6 Installing the Supercapacitor

Step 13 Install the air duct.

For details, see

8.4.24 Installing the Air Duct

Step 14 Install the server node.

For details, see

8.3.4 Installing an XH321 V5

Step 15 Power on the server node.

For details, see

8.3.1 Power-On Procedure

Step 16 Check the indicator status. If the health status indicator is steady green, the server

node is running properly.
For details, see

2.1.2 Indicators and Buttons

Step 17 To burn the product SN in the new mainboard, contact technical support.

NO TICE

If the product SN is not burnt in the new mainboard, the iBMC and OS cannot

obtain the product SN. This may affect the running of some services or the

monitoring and management on the device.

Step 18 After the mainboard is replaced, the LOM is replaced and the MAC address of the

LOM is changed. If the LOM is used for transferring data, you need to configure

the LOM data.

Step 19 After the mainboard is replaced, the iBMC and BIOS settings are restored to the

default settings of the new mainboard. Configure the iBMC and BIOS based on

service requirements.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

101

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands