manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 21

NO TE

When Intel

®

 Xeon

®

 Scalable (Gold 6144, Gold 6146, Gold 6244, or Gold 6252N)

processors are configured, wide conjoined heat sinks are required to meet the

high heat dissipation requirement.

–

If the processor power is higher than 165 W, use a wide conjoined heat

sink.

●

The same model of processors must be used in a server.

●

Contact your local Huawei sales representative or use the 

Computing

Product Compatibility Checker

 to determine the components to be used.

Figure 2-6 Processor positions

2.3 Memory

2.3.1 Memory

2.3.1.1 Memory Identifier

You can determine the memory module properties based on the label attached to

the memory module.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

2 Hardware Description

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

12

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands