Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 81

Page: 81 / 186

Figure 8-37 Pasting patterns

2. Use a clean card or blade to smear the thermal compound over the entire

center of the CPU.
The thickness of the thermal compound is about that of a piece of ordinary

paper. Ensure that the thermal compound is evenly and fully coated.

Figure 8-38 Smeared thermal compound layer

Step 9 Install the processor carrier to the conjoined heat sink.

1. Aligning the processor corner with a triangle mark with the corner of the heat

sink with a notched triangle, buckle the processor carrier on the heat sink.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands