manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 53

a. Log in to the iBMC WebUI.

For details, see 

10.2 Logging In to the iBMC WebUI

.

b. Choose Power > Power Control.

The Power Control page is displayed.

c.

Click Power Off or Forced Power Off.
A confirmation message is displayed.

d. Click OK.

The server starts to be powered off.

●

Use the iBMC CLI.
a. Log in to the iBMC CLI.

For details, see 

10.4 Logging In to the CLI

.

b. Run the following command:

ipmcset -d powerstate -v 1

c.

Type y or Y and press Enter.

●

Use the Remote Virtual Console.
a. Log in to the Remote Virtual Console.

For details, see 

10.3 Logging In to the Desktop of a Server

.

b. On the KVM screen, click   or 

 on the toolbar.

c.

Choose Power Off or Forced Power Off.
A dialog box is displayed.

d. Click Yes.

8.3.3 Removing an XH321 V5

Procedure

Step 1 Determine the position of the server node in the chassis.

Figure 8-2 Positions and slot numbers of the XH321 V5 server nodes

Step 2 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

Step 3 Remove the multi-port cable.

1. Press the two tabs on the multi-port cable connector. See (1) in 

Figure 8-3

.

2. Remove the multi-port cable from the universal connector port (UCP) on the

server. See (2) in 

Figure 8-3

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

44

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands