Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 4

Page: 4 / 186

Symbol

Description

Supplements the important information in the main

text.
NOTE is used to address information not related to

personal injury, equipment damage, and environment

deterioration.

Change History

Issue

Date

Description

2021-03-09

● This issue is the seventeenth official release.

2021-01-21

● This issue is the sixteenth official release.

2020-11-07

● This issue is the fifteenth official release.

2020-09-03

● This issue is the fourteenth official release.

2020-08-04

● This issue is the thirteenth official release.

2020-06-05

● This issue is the twelfth official release.

2020-05-11

● This issue is the eleventh official release.

2020-04-20

● This issue is the tenth official release.

2020-03-18

● This issue is the ninth official release.

2020-03-05

● This issue is the eighth official release.

2019-12-20

● This issue is the seventh official release.

2019-08-10

● Added the support for the Cascade Lake

processors.

2019-01-04

● Added the description about X722 LOMs

and PCIe slots.

● Updated the technical specifications.
● Added the description of the NC-SI feature.

2018-08-02

● Added the temperature restrictions when

the M.2 is used with a PCIe RAID controller

card.

● Added information about the Avago

SAS3004 iMR RAID controller card.

2018-05-21

● Refined the document for easy use.

2018-01-22

● Optimized the processor installation

procedure.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

About This Document

Issue 17 (2021-03-09)

iii

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands