manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 40

Figure 5-1 Protective clothing

●

Before touching a device, ensure that you are wearing ESD clothing and ESD

gloves (or wrist strap), and remove any conductive objects (such as watches

and jewelry). 

Figure 5-2

 shows conductive objects that must be removed

before you touch a device.

Figure 5-2 Conductive objects to be removed

Figure 5-3

 shows how to wear an ESD wrist strap.

a. Secure the ESD wrist strap around your wrist.
b. Fasten the strap buckle and ensure that the ESD wrist strap is in contact

with your skin.

c.

Insert the ground terminal attached to the ESD wrist strap into the jack

on the grounded rack or chassis.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

5 Safety Instructions

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

31

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands