manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 104

NO TE

This operation is required only when the PCIe card is an SP380 NIC (BOM code: 02312JBD).

Step 9 Install the PCIe riser module.

1. Insert the PCIe riser module into the front PCIe slot of the server node in the

arrow direction. See (1) in 

Figure 8-61

.

2. Use a Phillips screwdriver to tighten the screw to secure the PCIe riser module.

See (2) in 

Figure 8-61

.

3. Install the server node panel in the arrow direction. See (3) in 

Figure 8-61

.

4. Use a Phillips screwdriver to tighten the screws on the node panel. See (4) in

Figure 8-61

.

Figure 8-61 Installing the PCIe riser module

Step 10 Install the server node.

For details, see 

8.3.4 Installing an XH321 V5

.

Step 11 Power on the server node.

For details, see 

8.3.1 Power-On Procedure

.

----End

8.4.23 Removing the Air Duct

Procedure

Step 1 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

95

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands