manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 109

Step 17 Remove all cables from the mainboard.

For details, see 

7 Internal Cabling

.

Step 18 Place the removed server node case (with the mainboard) and components on

different ESD workstations.

NO TE

● If the removed component is no longer used, pack it again using the original packaging

materials and store it properly.

● Before placing the mainboard into an ESD bag, ensure that the processor sockets are

installed with covers.

● Place only one component in an ESD bag.

----End

8.4.26 Installing the Mainboard and Server Node Case

Procedure

Step 1 Take the component out of its ESD bag.

Step 2 Place the server node on the ESD workstation.

Step 3 Determine the position of the mainboard and the server node case.

Figure 8-65 Mainboard and server node case

Step 4 Connect all the cables to the mainboard.

For details, see 

7 Internal Cabling

.

Step 5 Install processors.

For details, see 

8.4.12 Installing a Processor

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

100

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands