manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 67

Step 9 Connect the cable to the RAID controller card.

For details, see 

7 Internal Cabling

.

Step 10 Install the server node.

For details, see 

8.3.4 Installing an XH321 V5

.

Step 11 Power on the server node.

For details, see 

8.3.1 Power-On Procedure

.

Step 12 Configure the RAID controller card.

For details, see 

Huawei V5 Server RAID Controller Card User Guide

.

----End

8.4.5 Removing the Supercapacitor (Server with a Screw-in

RAID Controller Card)

Procedure

Step 1 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

Step 2 Remove the server node.

For details, see 

8.3.3 Removing an XH321 V5

.

Step 3 Place the server node on the ESD workstation.
Step 4 Determine the position of the supercapacitor.
Step 5 Remove the air duct for the supercapacitor.
Step 6 Remove the supercapacitor holder.

1. Loosen the screws on the server node panel. See (1) in 

Figure 8-20

.

2. Remove the panel. See (2) in 

Figure 8-20

.

3. Loosen the screws that secure the supercapacitor holder and remove the

supercapacitor holder. See (3) in 

Figure 8-20

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

58

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands