Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 78

Page: 78 / 186

Figure 8-33 Installing a CPU socket cover

----End

8.4.12 Installing a Processor

NO TICE

● Only Huawei technical support or personnel authorized by Huawei can install

the processors from Huawei servers.

● Do not wear ESD gloves during processor replacement. The gloves may catch

on pins on the processor socket and damage it.

● The same model of processors must be used in a server.
● Before installing a processor, clean the surface of the processor, the heat sink,

and the processor carrier. If there is residual thermal compound, clean it.

Procedure

Step 1 Power off the server node.

For details, see

8.3.2 Power-Off Procedure

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands