manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 92

Figure 8-49 Installing a TPM

2. Connect the cables to the TPM.

For details, see 

7.1 TPM Cabling

.

Step 10 Install the PCIe riser module.

For details, see 

8.4.22 Installing a PCIe Riser Module

.

Step 11 Install the air duct.

For details, see 

8.4.24 Installing the Air Duct

.

Step 12 Install the server node.

For details, see 

8.3.4 Installing an XH321 V5

.

Step 13 Power on the server node.

For details, see 

8.3.1 Power-On Procedure

.

Step 14 Enable TPM.

1. Access the BIOS interface.

For details, see 

Huawei Server Purley Platform BIOS Parameter Reference

.

2. Select Security.
3. Select TPM Operation and press Enter.
4. Select Enable.
5. Press F10.

The system displays "Exit Saving changes?" dialog box is displayed.

6. Select Yes.

The settings are saved.

7. Restart the server.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

83

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands