Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 51

Page: 51 / 186

Figure 8-1 Die-casting pliers

8.3 Basic Operations

8.3.1 Power-On Procedure

NO TICE

● Before powering on a server node, ensure that the server node is powered off,

all cables are connected correctly, and the power supply voltage meets service

requirements.

● During the power-on process, do not remove and insert drives or disconnect

and connect network cables or Console port cables.

● If a server node is powered off, wait for at least one minute before powering it

on again.

The server node can be powered on in any of the following ways:

●

If the server node is installed but the chassis is not yet powered on, power on

the chassis.
The server node will be powered on along with the chassis.

●

If the chassis is powered on but the server node is not installed, install the

server node.
The server node will be automatically powered on after it is installed.

●

If the chassis is powered on but the server node is not running properly, hold

the power button the front panel for six seconds to power off the service

node forcibly, and then press the power button to power it on.

●

If the chassis is powered on and the server node is in standby state (the

power indicator is steady yellow), you can use any of the following methods

to power on the server node:
–

Use the iBMC WebUI.
i.

10.2 Logging In to the iBMC WebUI

ii. Choose Power > Power Control.

The Power Control page is displayed.

iii. Click Power On.

A confirmation message is displayed.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands