Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 38

Page: 38 / 186

Software and Hardware Compatibility

Use the

Computing Product Compatibility Checker

to obtain information about

the operating systems and hardware supported.

NO TICE

● Do not use incompatible components. Otherwise, the server may fail to work

properly. The technical support and warranty do not cover faults caused by

incompatible components.

● The performance of servers is closely related to application software, basic

middleware software, and hardware. The slight differences of the application

software, middleware basic software, and hardware may cause performance

inconsistency between the application layer and test software layer.
●

If the customer has requirements on the performance of specific

application software, contact Huawei sales personnel to apply for POC

tests in the pre-sales phase to determine detailed software and hardware

configurations.

●

If the customer has requirements on hardware performance consistency,

specify the specific configuration requirements (for example, specific drive

models, RAID controller cards, or firmware versions) in the pre-sales phase.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

4 Software and Hardware Compatibility

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands