manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 100

Figure 8-58 Removing a PCIe riser module

Step 6 Disconnect the cable between the PCIe card and the NC-SI port.

For details, see 

7.4 PCIe Card Cabling

.

NO TE

This operation is required only when the PCIe card is an SP380 NIC (BOM code: 02312JBD).

Step 7 Remove the PCIe card.

For details, see 

8.4.19 Removing a PCIe Card

.

Step 8 Place the removed PCIe riser module and PCIe card in different ESD bags.

NO TICE

Place only one component in an ESD bag.

Step 9 Install a filler panel.

NO TE

Perform this operation only when a PCIe riser module is not installed immediately.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

91

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands